Design Engineer: Prototype Series product image (1)
Design Engineer: Prototype Series product image (2)
Design Engineer: Prototype Series product image (3)
Design Engineer: Prototype Series product image (4)
Design Engineer: Prototype Series product image (1)
Design Engineer: Prototype Series product image (2)
Design Engineer: Prototype Series product image (3)
Design Engineer: Prototype Series product image (4)

Design Engineer: Prototype Series

749,70 kr SEK

Design is Engineering™

Engineering is Design™

Select Size

Please select Size

More details

  • 100% cotton
  • Sport Grey is 90% cotton, 10% polyester
  • Midweight fabric: 6.0 oz/yd² (203.43 g/m²)
  • Regular fit

Size & Fit

View size chart

Quality Guarantee & Returns

  • Quality is guaranteed. If there is a print error or visible quality issue, we'll replace or refund it.
  • Because the products are made to order, we do not accept general returns or sizing-related returns.

Design Engineer: Prototype Series Size Guide

https://files.cdn.printful.com/upload/product-measure/89/89d7c60077a9da0fc408df7c7a45cfca_l?v=1652962719
Size label Length Width Sleeve length
S
28
18
33 1/2
M
29
20
35
L
30
22
36 1/2
XL
31
24
38
2XL
32
26
39 1/2
3XL
33
28
39 1/2
4XL
34
30
40

Measurements are provided by our suppliers. Product measurements may vary by up to 2" (5 cm).

Pro tip! Measure one of your products at home and compare with the measurements you see in this guide.



A Length

Place the end of the tape beside the collar at the top of the tee (Highest Point Shoulder). Pull the tape measure to the bottom of the shirt.



B Width

Place the end of the tape at the seam under the sleeve and pull the tape measure across the shirt to the seam under the opposite sleeve.



C Sleeve length

Place the end of the tape at the center back of the collar, then pull the tape measure along the top seam of the sleeve. When you get to the shoulder hold the tape in place at the shoulder and continue to pull down the sleeve until you reach the hem of the sleeve.